LED neon tube! Can the cob light strip be cut at will?

Cob light strips are usually slender. If you need to cut them short, you need to pay attention to safety to avoid damaging the light strips or causing injury with scissors. Generally speaking, it is difficult to cut Cob light strips when the length exceeds 1 meter, and you need to use scissors or other tools for cutting.

If you really need to cut the Cob light strip shorter, it is recommended to cut off the power first and fix the light strip at the position where you need to shorten it to avoid damage to the light strip. Then use scissors or other tools to cut it short, but be careful not to cut too much to avoid damage to the light strip. In addition, it should be noted that the Cob light strip needs to be recharged or the battery replaced after being cut short to ensure its brightness and lifespan.

Here are some suggested methods for cutting Cob light strips:

Use scissors: If you only have one pair of scissors, it is recommended to use the front end of the scissors to cut the light strip. Insert the front end of the scissors into the light strip, then use the back end of the scissors to cut the light strip. Be careful not to cut too much to avoid damage to the light strip.

Use pliers: If you have more tools, such as pliers, you can try using pliers to cut the light strip shorter. Hold the light strip with pliers and carefully cut it. It is also important to note not to cut too much to avoid damage to the light strip.

Use a cutting machine: If you have enough funds, you can consider purchasing a cutting machine to cut the light strips shorter. Cutters are generally easier to control than scissors, but they also need to be used with care to avoid damaging the strip.

No matter which method is used, you need to pay attention to safety to avoid damage to the light strip.