*Controller operation:

1.Long press for 3 seconds to set the number of lights on the stairs, click the button until all lights are on, up to 32 steps, long press again to confirm.

2.The blue light indicates that the serial number light is turned on

3.Touch the button to adjust the speed of turning off the lights on the controller. The higher the four gears, the slower the lights will turn on and turn off.

*Installation Tips:

1.When the lamp is plugged into the controller, be sure to find the socket of the corresponding serial number

2.The controller and sensor can be in the electric box

3.Be sure to connect the positive and negative poles, the red is the positive, the blue is the negative, and the low-voltage current is DC12-24V, not AC220V/110V

4.It is recommended to bury the line in advance and install the lights when the stairs are decorated.

5.The wiring needs to be disconnected, and the wiring cannot be plugged in to avoid short circuit