The light is uniform and soft, and the COB strip light is easier to install.
LED strip lights and LED light bars have been widely used in furniture, automobiles, advertising, lighting, ships, bars and other industries. LED strip lights are generally divided into two types: flexible LED strip lights and LED hard light strips. When installing, the strip lights will take into account the different environments and the installation will also be different.
Indoor installation: When LED strip lights are used for indoor decoration, they do not have to withstand wind and rain, so the installation is very simple. Take the LED strip lights produced by Guanghong Electronics as an example. Each LED strip lights has self-adhesive 3M double-sided tape on the back. During installation, you can directly peel off the sticker on the surface of the 3M double-sided tape, and then fix the strip lights where needed. Where to install, just press it flat with your hands.
Outdoor installation: Outdoor installation usually uses card slot fixation. Where cutting and connection are required, the method is the same as indoor installation, except that additional waterproof glue is required to consolidate the waterproof effect of the connection points. Then use special fixing clips to fix them. You can use an electric hammer to drill holes, and use plastic expansion tubes and screws to fix the clips.
As a newly popular LED strip light, COB strip light is a flexible lighting product with high light efficiency. Compared with traditional soft and hard strip lights, there is no spot in the middle. The light of the lamp is soft and the spot is uniform. It is used for indoor lighting and makes people feel The environment is comfortable.
Under the same heat dissipation conditions, higher power LED light-emitting chips can be used to help improve the illuminance or luminous efficiency of the entire lamp. Because it is a low-voltage strip light, usually 24V or 12V, it can be touched by hand when it is lit and will not cause harm to the human body. At the same time, COB strip lights come with 3M adhesive, which can be installed after tearing them apart. For example, the COB strip light products produced by DeKingLED are also waterproof, allowing the silicone to solidly wrap the light panel without falling off, making the cob strip light The overall structure is safer and more reliable.
COB strip lights can be cut into any shape and can be spliced with terminals. There are no dark spots and there is no need to worry about the lighting effect. These are things that cannot be achieved with traditional flexible strip lights. They are widely used in engineering and home decoration fields. Cabinet lights, stair aisles, exhibition halls, shopping malls, hotels, car lights and other places can achieve luminous effects that cannot be achieved with traditional strip lights, giving people a more comfortable and natural light.
