How to solve the problem of uneven lighting of LED strips?
LED strip lights are common in daily lighting. They can be seen everywhere in various outdoor shopping malls, restaurants, and hotels. Indoors, it can be said that almost all home lighting uses LED strip lights. On the one hand, it is a means of indirect lighting, and on the other hand, it is used for indirect lighting. On the one hand, it has a very good decorative effect and creates an environmental atmosphere. However, we can find that LED strip lights sometimes emit uneven and dim light. What is this? How to solve it?
LED strip lights are mainly installed in light troughs to create large-area light-emitting ceilings and walls, creating a wall-washing effect. Precisely because of its large lighting range, once a problem occurs, it will affect a wide range of light and shadow effects. When we choose LED strip lights, we must keep our eyes open and choose carefully.
Good quality LED lamp beads have consistent brightness from lamp bead to lamp bead, uniform light emission, and the brightness should be consistent at the beginning and end of the lamp strip. The light color of the strip lights should also be consistent. Use white paper close to the luminous surface of the strip lights and observe directly with your eyes. If you want the strip lights to have a uniform luminous effect, you must choose one with good color rendering when purchasing. The color rendering index Ra>80 is a requirement that a professional LED strip lights must meet. This is also the requirement of national standard GB50034-2013.
Improper installation of strip lights will also affect the lighting effect.
If the wall is unevenly painted, uneven lighting will occur. We can solve this problem by using an installation frame. The light-emitting angle of LED strip lights is usually only 120°. Some light troughs are too high and we cannot see the light produced by LED strip lights. In this regard, you can raise the LED strip lights so that the distance between the strip lights and the upper edge of the light trough is about 4-5cm, or you can stick the strip lights on the side wall.
If the strip lights is too long and the tail is not bright enough, you can use a higher power constant voltage driver. For example, a 6-meter strip lights uses 4A electrical appliances to ensure that the electrical appliances have enough margin without causing waste; you can also change the lamp The connection method of the belt is used to solve the problem of the tail not lighting up.
The installation of LED strip lights must be combined with the different indoor and outdoor environments and installed correctly according to the actual use to ensure good light output and extend the service life. The use of strip lights is more to create an environment and add more fun to life!
